Ever wonder what to do with your generator in the winter? Let’s discuss the winter preparation before it’s too late!

Maintaining the Generator During the Fall

Fall comes with it plenty of rain, as well as plenty of debris like falling leaves, twigs, and dead grass. Here, there are a few steps on keeping you standby lean and clean with a little fall maintenance:

  • Clear the area around the generator or leaves and dead grass.
  • Check the air vents and keep them clean of twigs, leaves, and any other windborne debris.
  • Change the oil, filters, and plugs in anticipation of cold weather.
  • Stock up on supplies like preventative maintenance kits and oil.

Preparing for Winter

Standby generator winter maintenance is all about making sure your generator is in the best condition possible as well as helping it adapt to much colder temperatures. Here, there are a few steps you need to run through.

  • Test run your standby generator to ensure it’s running effectively.
  • Install a cold weather kit to ensure the battery and other components are kept warm enough to start up.
  • Refill the propane tank if your generator runs on propane.
  • Ensure you have backup supplies of fuel, fuel stabilizers, lubricants, batteries, coolant, and spare parts in the event of a failure.
  • Clear the area around the generator of snow, brush snow off the cover and ensure vents are clear.

Caring for your Standby Generator During Severe Weather

Winter weather can get rough, indeed, with extreme winds and ice storms posing a real threat to your generator. To make sure it runs effectively, keep in mind the following steps:

  • Clear the pathway to your generator, so it’s easy to access in the event of a failure.
  • Even if you’re not using the standby generator, run it for ten minutes to make sure it can operate correctly when needed.
  • Clear the path from the inlet plug on the exterior of the home to the generator.
  • If you’re using the standby generator, temporarily block the radiator to assist in warming it up.
  • Keep a log of run durations and document any problems you might experience.

The above tips can make it a lot easier to ensure your generator gets the care, repair, and replacements it deserves if severe weather events end up knocking it out.

The Post-Winter Weather Checks

If you’ve made it on the other side of the winter weather without any worrisome experiences, it’s important to ensure that the cold, rain, snow, and wind haven’t left any lasting impact on its ability to perform.

  • Change the oil and coolant.
  • Replace the filters.
  • Make sure you have documented any instances of failure or malfunction so that you can address it

The heat of summer can bring its challenges when it comes to your standby generator, so it’s wise to start looking at spring and summer maintenance, too.

Schedule your Professional Generator Maintenance

There is plenty that you can do to ensure that your standby generator is kept as efficient as possible during the fall and to prepare it for winter. However, the best way to catch potential issues before they happen is to schedule a service and routine maintenance with a technician that’s qualified to work with your specific generator. Keep your technician’s contact details accessible, too.

Standby Generator Fall Maintenance and Winter Maintenance is Crucial

Cold and precipitation can both strain your standby generators to a degree they’re not fit to handle without a little care, meaning that power failures are much more likely.

☎️ (860) 343-1797
📩 customerservice@ctgeneratorservice.com

Related Articles: